Service manual

[6] DISASSEMBLY AND ASSEMBLY

The descriptions of this chapter are divided into the following sec-

tions:

1. Paper feed section, paper transport section, power section

2. Manual paper feed section

3. Fuser section

4. Optical system

5. Drum section

6. Developer section

7. Operation panel/medium cabinet

8. Major parts in the frame side

1.Paper feed section, paper transport

section, power section

1-1. Paper feed unit

1 Open the front cover and open the body. Release the right and

the left lock levers and pull out the manual paper feed unit.

2 Disconnect the CN-B connector of the lower PWB, remove the

paper feed unit fixing screws (4 pcs.), and lift the paper feed unit

to remove.

1-2. Paper feed roller ass’y removal

1 Disconnect the connector of the magnetic clutch in the rear frame

side.

2 Remove the hook section of the paper feed roller bearing in the

front frame side by using a screwdriver.

3 Remove the roller release arm spring from the paper feed frame.

6 – 1