Service manual

3. Installation procedure

(1) Optical system unlocking

1 Unlock the No.2/No.3 mirror unit.

Remove the No.2/No.3 mirror unit fixing screw (1 pc.) on the left

side of the copier.

2 Unlock the No.4/No.5 mirror unit.

Remove the No.4/No.5 mirror unit fixing screws (2 pcs.) on the

right side of the copier.

[In the case of SF-1014 with SF-MF14 (Optional) equipped.]

Open the paper feed tray on the right side of the copier.

Remove the No.4/No.5 mirror unit fixing screws (2 pcs.).

Then close the paper feed tray.

(2) Cassette setting

1 Pull out the cassette.

Lift the cassette and slowly pull it out from the copier until it stops.

2 Loading copy paper.

Set the copy papers in the cassette. Do not exceed the limit line

indicator.

Gently insert the cassette fully into the copier.

Mirror unit fixing screw

4 – 3