ND-Q250F7 Specifications
SHARP ELECTRONICS CORPORATION
1-800-SOLAR-06 • Email: sharpsolar@sharpusa.com
www.sharpusa.com/solar
1-28-13_JM
© 2012 Sharp Electronics Corporation. All rights reserved.
250 WATT
ND-Q250F7
Module output cables: 12 AWG PV Wire (per UL Subject 4703)
Design and specifications are subject to change without notice.
Sharp is a registered trademark of Sharp Corporation. All other trademarks are property of 
their respective owners.
ELECTRICAL CHARACTERISTICS
Maximum Power (Pmax)*  250 W
Tolerance of Pmax  +5%/-0%
PTC Rating  223.6 W
Type of Cell  Polycrystalline silicon
Cell Configuration  60 in series
Open Circuit Voltage (Voc)  38.3 V
Maximum Power Voltage (Vpm)  29.8 V
Short Circuit Current (Isc)  8.90 A
Maximum Power Current (Ipm)  8.4 A
y (%)  15.3%
Maximum System (DC) Voltage  600 V (UL)/1000V (IEC)
Series Fuse Rating  15 A
NOCT  47.5°C
  -0.485%/°C
  -0.36%/°C
  0.053%/°C
* Illumination of 1 kW/m
2
 (1 sun) at spectral distribution of AM 1.5 (ASTM E892 
global spectral irradiance) at a cell temperature of 25°C.
WARRANTY
25-year limited warranty on power output 
Contact Sharp for complete warranty information
CERTIFICATIONS
UL 1703, ULC/ORD-C1703, IEC 61215, IEC 61730, CEC
Contact Sharp for tolerance specifications
DIMENSIONS
  A  B  C  D  E 
39.1”/994 mm  64.6”/1640 mm  1.8”/46 mm  14.4”/365 mm  3.9”/100 mm
  F  G
37.7”/958 mm  43.3”/1100 mm
B AC K V IEW
S IDE  VIEW
A
D
D
B
E
E
G
F
C
ISO QUALITY & ENVIRONMENTAL MANAGEMENT
Sharp solar modules are manufactured in ISO 
9001:2000 and ISO 14001:2004 certified facilities.
MECHANICAL CHARACTERISTICS
Dimensions (A x B x C to the right)  39.1” x 64.6” x 1.8”/994 x 1640 x 46 mm
Cable Length (G)  43.3”/1100 mm
Output Interconnect Cable 
12 AWG with *SMK Locking Connector
Hail Impact Resistance  1” (25 mm) at 52 mph (23 m/s)
Weight  41.9 lbs / 19.0 kg
Max Load  50 psf (2400 Pascals)
Operating Temperature 
(cell)  -40 to 194°F / -40 to 90°C
* Intertek recognized for mating with MC-4 connectors (part numbers PV-KST4; 
PV-KBT4)
“BUY AMERICAN”
Sharp solar modules are manufactured in the United 
States and Japan, and qualify as “American” goods 
under the “Buy American” clause of the American 
Recovery and Reinvestment Act (ARRA).
Printed in U.S.A. on recycled paper.
10%
Cert no. XXX-XXX-XXXX


