Operation Manual

156
FTP Server/Client Scheduler
• [Register/UpdatethisPCtoManagementPC]
Click the button to send the viewer PC information to the management PC. You can easily register the
viewer PC information to the management PC.
[Panel Control] tab
Selectthepanelcontrolmethod(RS-232C/LAN).
• “Nopanel”optionbutton
Panels will not be controlled.
• “Singlepanel”optionbutton
Click [Connection Setting] and select the panel control
method(RS-232C/LAN).
• [ConnectionSetting]
 Selecteither“RS-232C”or“LAN”fromthe[Connectinginterface]optionbuttons.
Setting Description Default
RS-232C
COM port COM1~COM256 COM1
Baud Rate 9600,19200,38400 9600
LAN
Host name or IP
address
Enter the host name or the IP address of the panel to be
controlledwithin32alphanumericcharacters.
-
Data port
Enteradataportnumberbetween1025and65535forthe
panels to be controlled.
10008
Username
Entertheusername,ifoneexistsforthepanelstobe
controlled,in8charactersorless.
-
Password
Enterthepassword,ifoneexistsforthepanelstobe
controlled,in8charactersorless.
-
• [Testconnection]
 Checktheconnectiontoconfirmthatthepanelcanbecontrolled.Aftertheconnectionisestablished
successfully,themodelnameofthepanelisacquiredanddisplayed.Performoperationwiththe
powerofthepanelturnedon.TocontrolthepanelwiththeLB-1085,besuretochecktheconnection
once. The panel cannot be controlled unless a “Test connection” is performed.