Operation Manual

154
FTP Server/Client Scheduler
[Network] tab
Setthemethodusedtoacquiredatafromthenetwork.
• “PUSHtypedistribution”radiobutton
The data distributed at the timing of when the manual
transmission procedure is completed on the management
PCisrecievedusingFTPprotocols.
• “UseViewerIDinsteadofhostnameorIPaddress”
checkbox
The IP address is sent to the management PC by the
viewerPCusingHTTPprotocols.CheckthisboxiftheIP
addressoftheviewerPCisnotafixedIPaddress.Click
[Launch HTTP Sever now] on the [HTTP Server] tab in the
Pro WEB Server Management Tool window to launch the
HTTP Server.
•“PULLtypedistribution”radiobutton
Each viewer PC retrieves distribution data from the
management PC at regular intervals using the HTTP
protocol.
•[FTPServerSetting]tab
SetstheFTPServer.
• “Username”:Mustbekeptwithin30alphanumericcharacters.
• “Password”:Mustbekeptwithin30alphanumericcharacters.
• “PortNumber”:Enteravaluebetween1and65535.
The initial default values are:
• Username:ftp
• Password: ftp
• Port Number: 21
 •IfyouhaveinstalledtheViewerVersion,auniqueFTPServerwillbeinstalled,andstartedasa
service.ThedefaultTCP/IPportnumbersare20and21.Ifthisportnumberisalreadyusedby
anotherservice,changetheportnumber.TheFTPsettingsofthepanelsregisteredwith“Panel
Management”onthemanagementPCmustusethesameportnumber.(p.108)