Operation Manual

127
Switchestothespecifiedinputbeforedisplayingthe
break-in program.
•“PowerOFFthePanelafterProgramisdisplayed”checkbox
Turnsthepaneloffafterthebreak-inprogramhasfinished.
•“ChangePanelInputtothefollowingafterProgramisdisplayed”checkbox
Switchestothespecifiedinputafterdisplayingthebreak-inprogram.
8) Click[OK].
Thebreak-inprogramisnowconfirmed.
Confirmedprograms(orstopcommands)aremarked
withtheconfirmedsign(
).
 •InPULLtypedistribution,thedistributionwillstartatthetimeofthefirstaccessfromtheviewerPCafter
thedistributionisconfirmed.
•Thefollowingrestrictionsareapplicableinthepanelcontrol:
InthecaseofPNseriesandLB-1085,theinputcannotbeswitchedto“TV”.
•Thebreak-inprogramwillnotbedisplayedifitsscheduledtimehasalreadypassed.
•Aftertheendofthebreak-inprogramdisplay,programsinthenormalschedulewillbedisplayed.The
program which was originally scheduled to be displayed at the time when displaying of the break-in
program has ended will be displayed from the beginning.
•Theendofthebreak-inprogramischeckedeveryminute(atsecond00).Thedisplayofthenormal
programwillstartfromthefirst00secondaftertheendofthebreak-inprogramdisplay.
•Onlyonebreak-inprogramcanbeassignedtoonepanel.
Distributing