Operation Manual

108
Panel Management
3) Hostname or IP Address (PUSH type distribution)/Viewer ID (PULL type distribution)
(Compulsory)
IncaseofthePUSHtypedistribution[staticIPaddress],setthehostnameorIPaddressofaviewer•
PC that can be accessed from the server.
IncaseofthePUSHtypedistribution[dynamicIPaddress]orPULLtypedistribution,setaviewerID•
beginningwith“@”(2to30alphanumericcharacters).
You cannot create two or more panels with the same host name, IP address and viewer ID.
4) MAC Address
Set the MAC address for the viewer PC if you want to turn it on from the management PC.
5) Distribution Type
TosenddatatotheviewerPC,selectthe“PUSH”radiobutton.
If you want the viewer PC to retrieve data from the management PC at regular intervals, select the
“PULL”radiobutton.
IftheviewerPCdoesnothaveastaticIPaddressforPUSHtypedistribution,check“DistributetoIP
addressnotifiedfromviewers”.
6) FTP Setting (for the PUSH type distribution only)
 Enterthe“User”(within30alphanumericcharacters),“Password”(within30alphanumericcharacters),
and“PortNumber”(1-65535)thatyousetfortheviewerPCFTPservicesettings.
  FTPsettingsforaddingapanelcanbesetinadvance.
Click[FTPSetting]andsetthedefaultvalues.Referto“RegisteringtheFTPsettingsdefaultvalues
foraddingapanel”onp.110.
7) Power Management
 IfyouwanttoturnthepoweroftheviewerPConoroffataspecifiedtime,select“Send“TurnOn/Off”
command to viewer PC at the following time”, and set the “Turn On at” and “Turn Off at”.(Times can be
specifiedinincrementsof5minutes)
8) Clock Adjustment
 IfyouwanttosynchronizethetimeofthemanagementPCwiththatoftheviewerPC,select
“SynchronizeViewerPC’sclockwiththisPC’sclock”andsetthesynchronizationtime.(Timescanbe
specifiedinincrementsof5minutes)
9) Attributes
Enter a comment for the viewer PC.
3. Click [OK].