Operation Manual

112
FTP Server/Client Scheduler
Deleting Break-in Program Information
Clickthe[DeleteBreak-inProgramInformation]menu.Aconfirmationmessagewillappear.Click[Yes]todelete
allregisteredbreak-inprograminformationcurrentlysavedinClientScheduler.
Deleting Emergency Scroll Message Information
Click[DeleteEmergencyScrollMessageInformation]menu.Aconfirmationmessagewillappear.Click[Yes]to
deleteallregisteredemergencyscrollmessageinformationcurrentlysavedinClientScheduler.
 •Emergencyscrollmessagescanbedistributedfrome-SignagePro(PN-SS05).
 Emergencyscrollmessagescannotbedistributedfrome-Signage(PN-SS01/SS02).
Get data from management PC
Click[GetdatafrommanagementPC]toreceivedistributiondatafromthemanagementPC.Thisfunctioncan
onlybeusedwithPULLtypedistribution.
Version information
Clickthe[Version]menu.TheClientScheduler[Version]dialog
boxwillappear.
  Youmaybeaskedtoprovideversioninformationin
the event that you need to contact SHARP regarding a
problem with SHARP Digital Signage Software.
If you input a temporary license code when installing, you will
only be able to use the software for a two-month trial period.
Register your license code before the end of the trial period.
ForinstructionsonhowtoregisterLicenseCodesrefertop.88.
Exiting Client Scheduler
ToexitClientScheduler,clickthe[ExitClientScheduler]menu.
DonotexitClientSchedulerunnecessarily.
Distributing content directly by using USB memory or another external storage device
ThecontentcanbedisplayedsimplybyinsertingUSBmemoryoranotherexternalstoragedevicecontaining
copiedcontentintotheviewerPC.
 •DonotremovetheUSBmemoryoranotherexternalstoragedevicefromthePCbeforetransferis
completed.
•DependingontheexternalstoragedevicesuchasUSBmemory,distributioncannotbeperformed
successfully.
1. Set the viewer PC to “Contents direct distribute mode.”
1) Clicktheicon(
)intheTaskTrayintheviewerPCandclickthe[Setting]menu.
2) Clickthe[USBDistribute]tabandselectthe“Contentsdirectdistributemode”optionbutton(
F
p.111).
3) Set“USBmemory’sfoldertodistribute”asrequired.
4) Click[OK].
2. Copy the content to be distributed to USB memory or another external storage device.
CopythecontenttothefoldersetinStep1-(3).
The contents placed in folders lower than the set folder are not displayed.
Client Scheduler / Distributing content directly by using USB memory or another external storage device