User manual
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- BEFORE USING THE MACHINE AS A NETWORK SCANNER
- ENTERING DESTINATIONS
- TRANSMITTING AN IMAGE
- SPECIAL MODES
- SPECIAL MODES
- STORING SCAN OPERATIONS (Programs)
- ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase)
- SCANNING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan)
- SENDING AN IMAGE AT A SPECIFIED TIME (Timer Transmission)
- WHITENING FAINT COLOURS IN THE IMAGE (Suppress Background)
- SCANNING BOTH SIDES OF A CARD ONTO A SINGLE PAGE (Card Shot)
- SCANNING MANY ORIGINALS AT ONCE (Job Build)
- SCANNING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original)
- SCANNING THIN ORIGINALS (Slow Scan Mode)
- SENDING TWO PAGES AS A SINGLE PAGE (2in1)
- CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT (Transaction Report)
- CHECKING THE STATUS OF TRANSMISSION/RECEPTION JOBS
- INTERNET FAX RECEPTION FUNCTIONS
- SCANNING FROM A COMPUTER (PC Scan Mode)
- METADATA DELIVERY
86
6
Turn the card over and press the
[COLOUR START] key ( ) or the
[BLACK & WHITE START] key ( ) to
scan the reverse side of the card.
Press the same [START] key that was used to scan the front
side.
Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
7
Touch the [Read-End] key.
If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure,
resolution, scan size, and send size.
The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.
To cancel Card Shot...
Touch the [Cancel] key in the screen of step 3.
or
Read-EndConfigure
Place next original. (Pg.No.x)
Press [Start].
When finished, press [Read-End].