Instruction manual
Introduction
There are two models of R-Series Rectangular Tunnel Detectors, the R8000 and
the R9500; they are designed to detect the presence of Coded Wire Tags
(CWTs) in fish fed through the central tunnel, such as salmon, herring and eels.
The R-9500 may also be operated with a conveyor belt running through it for
detecting tags in a large volume of small fish.
Fish are passed through the tunnel at a rate of 5 to 23 feet/second (1.5 to 7
meters/second). If a fish contains a tag, the Detector responds with an audio
alarm, indicator lights, and an electronic signal to activate an optional Diverter
Gate. For stand-alone operation (operation without a Gate), an operator
manually sorts the exiting fish according to the presence or absence of the alarm
signal. The optional Diverter Gate automatically diverts tagged fish to one side
and untagged fish to the other as they exit the tunnel, and the Counters tally the
fish exiting from each side. Fish are typically slid through the R-Series Detector
by hand with the Detector inclined at 10 to 25 degrees while the tunnel is kept
wet with a stream of water.
Part 1: Organization and Use of this Manual.
This manual describes the setup and operation of all R8000 and R9500
Detectors, Diverter Gates, and Counters. Since most of the R-Series Detectors
have a Diverter Gate with Counter attached, this manual integrates explanation
of the use of the Gate with that of the Detector. For operation without a Gate, all
references to the Gate, and the Gate controls on the Detector, may simply be
ignored.
This manual is separated into several parts.
Part 2 Detailed Equipment Description.
Part 3 Assembly, setup, and powering the equipment.
Part 4 Detailed Operating Procedures
Part 5 Care and Maintenance, including disinfection.
Part 6 Troubleshooting, describes alarms, things to avoid and things that
must be done to assure consistency and reliability. This section also
describes problems and specific solutions where possible.
Part 7 A glossary of terms.
Part 8 An Appendix, which includes a Daily Operations Checklist, detector
specifications, shipping instructions and other information.
R-Series Instruction Manual 6










