Specifications

8 ProtoMat 95s/II
7.6 Contour milling in circuit base material
. . . . . . . . . .54
7.7 Milling wide isolation channels and rubouts
. . . . . .54
7.8 Front plate engraving
. . . . . . . . . . . . . . . . . . . . . . .55
7.9 Milling solder-stop sheets
. . . . . . . . . . . . . . . . . . . .55
7.10 Milling layout films
. . . . . . . . . . . . . . . . . . . . . . . .56
7.10.1 Staining milled films . . . . . . . . . . . . . . . . . . . . . . 57
7.10.2 Removing the coating. . . . . . . . . . . . . . . . . . . . . 57
7.11 Tool libraries in BoardMaster
. . . . . . . . . . . . . . . .58
7.12 Cleaning the PCB
. . . . . . . . . . . . . . . . . . . . . . . . .59
7.13 Tutorial on creating a printed circuit board
. . . . . .59
8.0 Practical tips . . . . . . . . . . . . . . . . . . . . . . . . 62
9.0 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
9.1 Maintenance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
9.1.1 Working depth limiter . . . . . . . . . . . . . . . . . . . . . . 64
9.2 SerialPort 1 serial connection
. . . . . . . . . . . . . . . . .65
9.3 SerialPort2 serial connection
. . . . . . . . . . . . . . . . .66
9.4 Connecting the stepping motors
. . . . . . . . . . . . . . .67
9.5 Connecting the plotter head
. . . . . . . . . . . . . . . . . .67
9.6 Setting the tool change positions . . . . . . . . . . . . . .
67
9.7 EPROMs
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
9.8 ProtoMat 95s/II and AutoContac
. . . . . . . . . . . . . .73
9.9 Switching the device voltage, electrical fuses
. . . .74