Specifications

Appendix
ProtoMat 95s/II 71
fig. 54:
fig. 55:
› If necessary, correct the plotter head position using the arrow keys in
the main menu bar.
› Then repeat the bold printed steps (see above) until the transfer
station can be shifted over the tool with no problem.
› Click on
READ
in the
POSITION OF PLOTTER HEAD OVER
TRANSFER STATION (MM)
tool magazine window.
The coordinates set for the plotter head are now imported and saved.
› Now click on
OPEN
in the
COLLET
window.
› Remove any tool from the collet.
1
- Auxiliary gripper
2
- Changeover-station
3
- Plotter head
3
2
1
1- Tool change magazine
1