Specifications

Appendix
ProtoMat 95s/II 69
fig. 50:
› Now click on Service.
The following window appears.
fig. 51:
› Enter
BMASTER
in the input field.
Note: Once the password has been entered, all tool change
functions can be operated manually and independently of one
another.
› Click on
CHECK
at the top left of the
TOOL MAGAZINE
window.
The machine moves to the check position.
› Now click on
OPEN
in the
COLLET WINDOW
.
The plotter head collet opens.
› Insert a universal milling cutter tool in the plotter head collet. Make
sure that the ring on the tool is at the same level as the lower plate of
the working depth limiter (see Fig. 52 on page 70).