Specifications

Appendix
64 ProtoMat 95s/II
9.0 Appendix
9.1 Maintenance
Note: Keep spindles clean. In rooms with a high air humidity, wipe
down with a lightly oiled cloth from time to time. Keep transport
spindles oiled and clean. Do not oil the bearings.
9.1.1 Working depth limiter
fig. 46:
Dismantle and clean the working depth limiter at regular intervals. To do
this, first switch off the machine. Then proceed as follows:
› Undo the pneumatic connection.(
1
)
› Remove the plug from the spindle (
3
).
› Undo the Allen screws in the retaining block (
4
).
› The spindle may be pulled up and out together with the pneumatic
cylinder (
2
). Twist the spindle from side to side if necessary.
› Remove the fixture (
5
).
› The working depth limiter (
6
) can now be pulled out to the side for
cleaning.