Specifications

Stages in milling and drilling
ProtoMat 95s/II 49
fig. 34: LPKF ProtoMat 95s/II
working depth limiter
Milling depth is set by adjusting the knurled nut (2) on the working depth
limiter.
Turning the wheel clockwise increases the milling depth and also the
milling width in the case of LPKF universal milling cutters due to their
conical shape.
Turning the wheel counter-clockwise reduces the milling depth.
The milling depth is altered by approximately 4 µm for each click of the
wheel.
Turning the wheel counter-clockwise is easier than turning it clockwise,
particularly when the head is lowered.
1
- Holding plate
4
- Suction nozzle
2
- Knurled nut used to set milling depth
5
- Tool fixture (collet)
3
- Retaining block for working depth limiter
6
- Compressed air connection
1
2
3
4
5
6