Specifications

Tools, material and accessories
46 ProtoMat 95s/II
Material supplied by LPKF and suitable for machining:
FR3 material: engraving, drilling, milling
FR4 material: engraving, drilling, milling
Engraving film: engraving
The following products have proved particularly successful as materials
for RF andmicrowave applications:
Rogers: R0®4000 , RT/duroid®, TMM®, Ultralam®
Other materials upon request.
Danger! Do not allow to the material to overheat - lethal gases may
be produced.
Carcinogenic dusts may be produced when working with materials
containing glass fibres.
Therefore only work with the vacuum system switched on..
Carcinogenic dusts or hazardous gases may be produced when
working with unknown materials.
Ask your supplier or the manufacturer before you begin machining.