Specifications

Setup
40 ProtoMat 95s/II
fig. 27:
› Click on
UNLOCK
so that you can make entries in this dialogue box.
fig. 28:
› If necessary, correct the Home position coordinates by increased or
decreasing the value by the value previously measured.
› The new values will only be saved once the
MACHINE SETTINGS...
dialogue box is closed and you quit .
5.10 Making a new registration hole system
The registration holes in the red registration hole strip become larger
over time due to use and will no longer be as precise as before.
New holes must be drilled in the strips if this is the case.
The registration hole strips must be replaced when eventuallly there are
too many holes in them.