Specifications

Setup
38 ProtoMat 95s/II
› Now select the
MILLINGTOP
process from the production phase list
box.
Click on once again and enclose the milling track corresponding to
the first hole by clicking and dragging with the left mouse button.
fig. 25:
› Now enable the milling track for machining by clicking and
START
.
The software again changes automatically the specified tool and mills
a circular track. Check the settings, including the milling pass width
and the milling depth setting before you start machining.
› Perform a visual check to ensure that the milled channel passes
precisely around the centre point of the hole.