Specifications

Setup
ProtoMat 95s/II 37
fig. 23:
› Right-click on the project.
fig. 24:
The PLACEMENT dialogue box opens. Specify the position in the
ORIGIN POINT box as x=0, y=0 and confirm by clicking on OK.
› Select the
DRILLINGPLATED
process from the production phase
list box.
› Click on and enclose the first hole by clicking and dragging with
the left mouse button.
› Now enable the selected hole for machining by clicking and
START
. The hole is drilled in the board once the tool has been
changed for the specified drill.
› Next move to the PAUSE position and rotate the board about the x-
axis.