Specifications

Setup
ProtoMat 95s/II 33
Caution! Ensure that the correct tool is inserted in the correct
position.
The hood must be closed once the tools have been inserted.
› Once the hood has been closed, click on
TOOL BOX DOWN
in the
TOOL POSITIONS
dialogue box in
BoardMaster
to lower the tool
box.
› Continue at point „Preparing the tools“ on page 28 if you have not
assigned and inserted all tools in a single step. First save your tool
list.
5.4 After switching on
The machine moves to the x and y limit switches and remains in the
coordinate zero-point position. It now waits for commands from
BoardMaster
. If the equipment does not move when it has been
switched on, check the following:
1.
Is the POWER LED lit (only lights up after successful initialization)?
2.
Are all cables correctly inserted?
3.
You may need to check the power supply fuses.
5.5 Operating indicator on the LPKF ProtoMat 95s/II
POWER
(green):
Control unit operating indicator.
This only comes on when the system has been initialized (limit switch
reached).