Specifications

Computer-controlled functions
ProtoMat 95s/II 21
fig. 7: Side view of the LPKF
ProtoMat 95s/II
4.5 The hood and pneumatic port
The LPKF
ProtoMat
95s/II is normally supplied with the hood pre-
assembled. More detailed information on the hood can be obtained from
the relevant assembly instructions.
Danger! Close the flap by the handle only as there is a risk of
fingers being crushed at the sides of the flap.
Secure the flap when open in the catches provided for this
purpose.
1
4
3
2
7
5
6
8
1
- Plotter head
5
- Pneumatic system unit
2
- Hood limit switch connection
6
- Vacuum connection
3
- 6 bar port for connecting the hood
compressed air distributor
7
- X-axis motor
4
- Port for connecting the pneumatic system
unit
8
- Compressed air inlet (6 mm) from the
DispoMat (LPKF AutoContac, optional)