Specifications

Computer-controlled functions
ProtoMat 95s/II 15
4.0 Computer-controlled functions
4.1 Connection to a PC
The LPKF
ProtoMat
95s/II has two serial ports.The first (25-pin) is used
for connection to the controlling computer (PC). The second port (9-pin)
is reserved for future applications.
The 25-pin port on the LPKF
ProtoMat
95s/II control unit is connected to
one of the computer's serial ports using the null modem cable supplied.
Das RS232 cable (null modem) for the LPKF
ProtoMat
95s/II circuit
board plotter is wired as follows:
Shield connection at bozh sides!
The following parameters must be observed:
Baud rate 9600(default setting, others upon request)
Parity None
Data bits 8
Stop bit 1
Protocol Hardware
FiFo buffer
enabled no
25-pin socket
PC (COMx)
25-pin socket
Circuit board plotter
(SerialPort1)
2TXD3
3 RXD 2
45
5 4
7GND7
6 + 8 20
20 6 + 8