Specifications

Introduction
ProtoMat 95s/II 11
2.0 Introduction
The LPKF
ProtoMat
95s/II circuit board plotter is a system for creating
circuit board prototypes and engraving films as well as for engraving
aluminium or plastic. Each tool change required is made automatically.
The LPKF
ProtoMat
95s/II circuit board plotter is expressly
not
designed
for machining wood.
Unlike other machines in the LPKF
ProtoMat
family, the LPKF
ProtoMat
95s/II may only be operated under the hood supplied for safety reasons.
This is to be kept shut whenever the machine is running.
It is essential that you familiarize yourself with the functions of the LPKF
BoardMaster
driver program before using the plotter. You will find a
description of the driver program's functionality in the manual for the
LPKF
BoardMaster
. The LPKF
ProtoMat
95s/II is controlled through a
PC.
It is absolutely vital that you read the instructions given in this manual
before putting the machine into operation, otherwise you will invalidate
any warranty claims. For machines exported to other countries of the
European Community the guarantee conditions of the corresponding
country apply.
2.1 Ratings for the LPKF ProtoMat 95s/II
Voltage 200-240V (or 100-120V)
Power input 260VA
High-frequency spindle speed. 10.000 - 60.000 rpm
Weight approximately 50 kg
Drilling performance 1200 strokes/min
Resolution (smallest increment) 0.005 mm
Operating conditions:
Humidity 60% max.
Temperature: 15-25°C