Technical information

9871 Tenth Edition 3-15
Operating in Automated Mode
3. Place the cartridge into the PCAP as shown in Figure 3-10.
Note: Insert the cartridge so that it lies flat, with the customer label on top
and the VOLSER facing you.
4. Close the PCAP door.
• The panel displays LOCKED.
• The panel displays ??????, indicating that the VOLSER is unknown.
• As the robot audits the PCAP, the panel displays the VOLSER of the
cartridge entered and shows a dash in the rectangular box, indicating
that a cartridge is present in the PCAP.
Note: The robot does not move a cartridge with an unreadable label or a
cartridge placed in the PCAP incorrectly. When this occurs, the panel
displays CANT READ and you must remove the cartridge.
5. Refer to your software user’s guide and restore the PCAP to the locked
position.
Figure 3-10. Placing the Cartridge into the PCAP
E40041
VOLSER
LABEL
CUSTOMER
LABEL
PCAP
TAPE
INSERTION
DIRECTIONS