Technical information

Operating in Automated Mode
3-12 Tenth Edition 9871
7. Close the CAP door.
• The panel displays LOCKED when the CAP door is closed and locked
properly.
• The rectangular boxes on the panel show horizontal dashes as the robot
catalogs the CAP. The dashes indicate the number and location of
cartridges in the CAP magazines. The two-digit display field next to the
boxes also shows the number of cartridges placed in the CAP.
• The robot stores all cartridges with readable labels.
• The number of dashes in the rectangular boxes and the two-digit value
on the panel are reduced as the cartridges are removed from the CAP.
Note: The robot’s ability to move cartridges with unreadable labels or to move
cartridges placed in the CAP incorrectly, depends on the way the
Nearline software is configured.
Under normal conditions, when a cartridge is placed in the CAP
incorrectly or with an unreadable label, the robot audits the CAP,
displays a dash in the rectangular box in the CAP status display area on
the LSM operator panel, recognizes that a cartridge is present in the
CAP, but does not move it.
You must remove the cartridge from the CAP.
Figure 3-8. Placing Cartridges into Magazine Cells
E40252
CUSTOMER
LABEL
VOLSER
LABEL