Technical information

Operating in Automated Mode
3-10 Tenth Edition 9871
Entering Cartridges through the CAP
To enter cartridges through the CAP:
1. Issue the enter command at the operator console.
• The CAP status display area on the LSM operator panel displays ENTER.
• The CAP door unlocks.
2. Open the CAP door by pulling the CAP latch as shown in Figure 3-6.
• The panel displays Door Open, indicating that the CAP is open.
Figure 3-6. Opening the Cartridge Access Port
C40039
PCAP
CAP 0
CAP 1
(OPTIONAL)
LSM
ACCESS
D
OO
R
A
DETAIL A
CAP
LATCH