Technical information

9871 Tenth Edition 3-1

Operating the 9360 LSM

This chapter contains the procedures for:

• “Displaying LMU and LSM Status”

• “Powering on and Powering off the LMU”

• “Powering on and Powering off the LSM” on page 3-4

• “Powering off the Cartridge Subsystem” on page 3-7

• “Operating in Automated Mode” on page 3-9

• “Operating in Manual Mode” on page 3-17

■ Displaying LMU and LSM Status

Refer to your software user’s guide and enter the command at the operator

console to display:

• Current status of the Library Storage Modules (LSMs)

• Current status of the Library Management Unit (LMU)

• Online, offline, or standby status of each LMU station or port

■ Powering on and Powering off the LMU

The following pages describe how to power on and power off the LMU in those

units that allow customer access.

Note: Some 9330 LMUs and 9315 Electronic Modules (EMs) require a tool to

open the front doors. The panels and switches in these units are never

accessible to operators. Electrical components in the units can cause

serious injury. Contact Customer Support Services if the unit needs to be

opened.

If the front door of your unit does not require a tool to open, you may perform

these procedures:

• “Powering on” on page 3-2

• “Powering off” on page 3-2

• “Emergency Powering off” on page 3-3