Technical information

9871 Tenth Edition 2-7
LSM Operator Panel
5 Status Shows the status of the CAPs and prompts you to perform
enter or eject activities.
CAP 0 is the standard CAP. The CAP 1 display area is active
when the LSM uses the optional 30 cartridge CAP.
LOCKED
Lights when no CAP operations are in progress, or when the
CAP doors are closed after an enter or eject operation.
The following information is shown in the CAP status display
area during enter and eject operations:
Enter operations
Load Cartridges - ENTER
Lights when the CAP door is ready to be opened to place
cartridges in the CAP magazines.
Door Open
Lights when the CAP door is opened.
Eject operations
Remove Cartridges - EJECT
Lights when the CAP door is ready to be opened to remove
cartridges from the CAP magazines.
Door Open
Lights when the CAP door is opened.
Note: These panel displays appear when the CAP is operated
using commands entered at the operator console.
For more information about operating the CAP in
different modes and states, refer to your software
user’s guide.
Table 2-2. LSM Operator Panel Status Screen
Item
1
Category Description