Technical information

9871 Tenth Edition xiii
Preface
This guide describes how to operate the 9360 library storage module (LSM). It is
intended primarily for data center operators who operate the LSM. System
programmers and computer system administrators might also find the
information in this guide useful.
■ Organization
This guide has four chapters and one appendix:
Chapter 1 “General Information” describes the hardware components in
the Nearline Automated Cartridge Subsystem (ACS).
Chapter 2 “Controls and Indicators” shows the locations of the operator
panels and indicators for the LSM and cartridge drives, and
describes the functions. The chapter also shows the locations of
the emergency power-off switches for the LSM and cartridge
subsystem, and the power switch for the 9330 LMU.
Chapter 3 “Operating the 9360 LSM” contains the procedures to operate
the LSM. The chapter explains how to power on and power off
the LSM and LMU, and how to operate the LSM in automated
and manual modes.
Chapter 4 “Obtaining Support” describes how to contact Customer
Support Services for assistance if the LSM has a hardware or
software problem.
Appendix A “Cartridge Tape Information” describes how to prepare, inspect,
store, clean, and repair cartridges. The appendix also lists the
criteria that colored cartridges must meet to be used in the LSM.
Glossary The Glossary defines new or special terms and abbreviations
used in this guide.
Index The Index assists in locating information in this guide.