User Manual

E – 6
The timer will begin to count down.
When it reaches zero, all indicators
will go out and audible signal will
sound. NOW COOLING will appear
on the display. The cooling fan will
remain on until the oven cavity has
been cooled.
Open the door to cool the oven cavity.
WARNING:
The oven door, outer cabinet and oven cavity will become hot and pay attention to avoid burn
when cooling the oven.
Getting Started
Step
Procedure Pad Order Display
Plug the oven into a power point.
1
Close the oven door.
as above
2
Press the STOP/CLEAR pad so that the
oven beeps.
Only the dots will remain.
3
Stop/Clear
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
Press the STOP/CLEAR pad twice.
To Cancel a Programme During Cooking
Some smoke and odor may occur for a while at the beginning of GRILL, MIX, PREHEAT, CONVECTION
or automatic operations (except SENSOR COOK and EASY DEFROST), but the oven is not out of order.
To remove the cause of the smoke and odor, operate the oven without food for 20 min. on Grill using
top and bottom heaters before the first use and after cleaning.
Heating without Food
Step
Procedure Pad Order Display
Ensure that no food is in the oven.
Press the GRILL pad 3 times.
Enter the heating time (20 min.).
Press the INSTANT COOK/START pad.
IMPORTANT:
During this operation, some smoke and
odor will occur. Therefore open the win-
dows or run the ventilation fan in the
room.
COOK will flash on and off.
COOK
COOK
2
0 002
4
3
1
* This oven is preset with the OPERATION GUIDE in English.
To assist you in programming your oven, the operation guide will appear in the display.
In this manual, the display of operation guide is abbreviated.
* You can get operation guide in English, Malay or Russian.
To change the language, see page E-42.
Before Operating
x 3