User Manual

E – 18
Step Procedure Pad Order Display
x 1
x 1
NOTE:
The convection temperature of mix cooking after preheat will be set at the preheat temperature
automatically. If you wish to change convection temperature of Mix setting, using the above
procedure, press the CONVEC pad until the desired temperature appears in the display after Step 2.
Then continue to Step 3.
Warning:
The oven cavity, door, turntable, turntable support, racks, dishes and especially the bottom heater will
become very hot,
use thick oven gloves when putting/removing the food or turntable into/from the oven
to PREVENT BURNS.
(2) To Preheat and Cook with Mix (Convection)
* Suppose you want to preheat the oven to 250°C and cook for 20 minutes on Convec Mix High.
Press the INSTANT COOK/START
pad.
When "ADD FOOD" is displayed,
the oven is preheated. If the oven
door is not opened, the oven will
automatically hold at the preheat
temperature for 30 minutes.
COOK
0 002
COOK
MIX COOKING
1
COOK will flash on and off.
COOK will flash on and off.
PREHEAT
COOK
Select desired Mix setting by
pressing the Mix pad (for Convec
Mix High press once).
Select preheat temperature by
pressing the PREHEAT pad as
required (for 250°C press once).
COOK
will be displayed.
When preheat is over, the oven
w ill "beep" 4 tim es and ADD FOOD
will be displayed.
PRESS START will be displayed.
The timer begins to count down
to zero.
2
3
4
6
Enter desired cooking time.
5
Open the door. Place food in the
oven. Close the door.
Press the INSTANT COOK/START
pad.