User Manual

CONVENIENT FUNCTIONS
A sequence of 3 stages (maximum) can be programmed using combinations of MICROWAVE, GRILL or DUAL GRILL.
1. MULTIPLE SEQUENCE COOKING:
Example:
To cook for: 5 minutes on 70P power (Stage 1)
6 minutes grill only (Stage 2)
3 minutes on dual grill 10P power (Stage 3)
NOTE: If you set any programme after setting GRILL mode, omit step 3. If you press the COOKING MODE button after
setting GRILL mode, the GRILL mode will be changed to the DUAL GRILL mode automatically.
Example: To cook on 100P for 2 minutes, press the
START/AUTO MINUTE button twice.
NOTES:
• The AUTO MINUTE function for direct start, can only be input within 3 minutes after cooking completion, closing the
door or pressing the STOP/CLEAR button.
• The cooking time may be extended to a maximum of 99 minutes.
AUTO MINUTE enables you: • To cook on 100P microwave power in multiples of 1 minute.
• To extend cooking time in multiples of 1 minute.
2. AUTO MINUTE:
x2
3. Press the COOKING
MODE button once before
programming Stage 2.
STAGE 1
1. To enter the time, rotate the
TIME/KG/POWER knob
until the desired time is
displayed.
STAGE 2
4. To enter the time, rotate the TIME/KG/POWER
knob until the desired time is displayed.
5. To select the GRILL mode press the
COOKING MODE button twice.
x1
2. To select the MICRO mode and power level
press the COOKING MODE button once,
then rotate the TIME/KG/POWER knob
until the desired power is displayed.
x1
x1
STAGE 3
6. To enter the time, rotate the
TIME/KG/POWER knob until
the desired time is displayed.
8. Press the START/
AUTO MINUTE button
once to start cooking.
x3
7. To select the DUAL GRILL mode and power level
press the COOKING MODE button three
times, then rotate the TIME/KG/POWER knob
until the desired power is displayed.
13
Website: http://www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
x2
R-64STM O/M & C/B 5/4/01 8:53 am Page 13