Specifications

70 Chapter 9 Network Cable Management
The following image shows Traverse shelves with two cable management bars each,
Mini-SMB cabling, and ECMs. There is an opening with a protruding cover in the
left-most cover to route DCN Ethernet and RS-232 cables.
.
Figure 14 Traverse Shelves with Copper/Coax Cable Management Bars
Traverse 600
Copper and
Coax Cable
Routing
Copper and coax cables route to the out the bottom of the Traverse 600 shelf for
horizontal central office rack installation and to the right of the Traverse 600 shelf for
vertical cabinet installation. Also note there is a small opening with a protruding cover
in the left-most cover to allow routing of DCN Ethernet and RS-232 cables.
Figure 15 Traverse 600 Shelf Vertical Installation—Cable Routing
Cable
management bars
with tie-wrapped
cables
DCN
Ethernet and
RS-232
cable
opening
Coax and copper cables
routed to the left side
Left-most
back cover
ECMs with
Mini-SMB
connectors
Cable
management bars
with tie-wrapped
cables
Route coax and copper
cables to the right side
DCN Ethernet and
RS-232 cable opening