Specifications

64 Chapter 7 IP Address Planning
Out-of-Band
Management
with Static
Routes
Out-of-band management with static routes means that the management server is
directly connected by static route to each node by the Ethernet interface on the back of
each shelf. In this example, the management server communicates to each node directly
or through a router.
Figure 14 TransNav Management System Out-of-Band Management
Add a route to the management server using the bp-dcn-ip of Node 1. Add separate
routes to the node-ip of Node 2 and Node 3 using the IP address of the port on the
router connected to the server (Port IP A) as the gateway address.
At each router in the network, an administrator must add a route to the node-ip of the
nodes.
At Node 2, the bp-dcn-ip can be in the same network as the TransAccess Mux
connected to it.
See the topic IP Addresses in a TransNav Network for detailed information about
assigning IP addresses in a TransNav-managed network.
EMS
Server
IP
Gateway
Mask
172.168.0.2
172.168.0.1
255.255.255.0
Port IP A
172.168.0.1
Add routes for each node-ip to EMS server.
10.100.100.1 255.255.255.0 172.168.0.3
10.100.100.2 255.255.255.0 172.168.0.1
10.100.100.3 255.255.255.0 172.168.0.1
Add routes for each node-ip to router.
<node-ip> <mask> <Router Port IPs F & D>
10.100.100.2 255.255.255.0 172.169.0.2
10.100.100.3 255.255.255.0 172.170.0.2
node-id
bp-dcn-ip
bp-dcn-gw-ip
bp-dcn-mask
node-ip
10.100.100.3
172.182.0.2
172.182.0.1
255.255.255.0
Node3
ems-ip
ems-gw-ip
ems-mask
172.168.0.2
172.182.0.1
255.255.255.0
Port IP F
172.169.0.2
IP
Mask
Trap-1
Name
Gateway
172.171.0.3
172.171.0.2
255.255.255.0
10.100.100.2
TransAccess
TransAccess
Mux
Port IP D
172.170.0.2
Port IP E
172.182.0.1
Port IP G
172.171.0.1
node-id
bp-dcn-ip
bp-dcn-gw-ip
bp-dcn-mask
node-ip
10.100.100.1
172.168.0.3
172.168.0.1
255.255.255.0
Node1
ems-ip
ems-gw-ip
ems-mask
172.168.0.2
172.168.0.1
255.255.255.0
IP Network IP Network
Add route for node-ip to router.
<node-ip> <mask> <Node2 bp-dcn-ip>
10.100.100.2 255.255.255.0 172.171.0.2
Add route for node-ip to router.
<node-ip> <mask> <Node3 bp-dcn-ip>
10.100.100.3 255.255.255.0 172.182.0.2
node-id
bp-dcn-ip
bp-dcn-gw-ip
bp-dcn-mask
node-ip
10.100.100.2
172.171.0.2
172.171.0.1
255.255.255.0
Node2
ems-ip
ems-gw-ip
ems-mask
172.168.0.02
172.171.0.1
255.255.255.0
TN 00159