Instruction manual

Troubleshooting Guide

Problem Cause Solution

No Forward or Reverse a. Check wheel pins

b. Check belt & chain

a. Check to make sure wheel pins are in the wheels

b. Check belt & chain by removing front cover and

inspecting

Motor shuts off or will not start Electric box needs reset. Press reset button located on electric box on motor.

Wheels do not turn when machine is under

power

Axle pins out of place. Check axle pins and make sure they are in place

Motor Problems (humming etc.) a. Press reset button

(If problem persists

b. take fan cover off and unscrew 4 bolts to take the

fan off. Clean starter switch with emery board or cloth

Shank doesn’t ﬁ t into angle attachment a. Burrs inside angle attachment

b. Damage to shank insert end

a. File with round ﬁ le until burrs are gone

b. Remove damage w/ ﬁ le or hand grinder. Replace

shank if necessary.