User`s guide
Table Of Contents
- Aastra 610d User’s Guide
- Content
- Operating and Display Elements
- System Information
- Security
- Dialling and Phoning
- Using the Display and Operating Elements
- Supplementary features
- Making and answering calls
- Dialling by name – Quick search
- Dialling from the phone book - Alpha search
- Dialling from the Call List of Unanswered Calls
- Dialling from the Call List of Answered Calls
- Dialling with Redial
- Dialling with a configured softkey
- Requesting a Callback
- To answer the callback request
- Call waiting with an internal user
- Answering Call Waiting
- Starting an Announcement
- Receiving an Announcement
- Private call with PIN
- Using functions while in a call
- Organising absences from the desk
- Functions for special situations
- Forwarding a call during the ringing phase
- Rejecting a call during the ringing phase
- Listening to Voice Mail
- Sending text messages
- Reading text messages
- Picking up a call
- Making a call on a third-party phone
- Suppressing your call number from your called party's phone display
- Tracing Malicious Calls
- Activating personal call routing
- Activating Ring alone
- Setting functions by remote control
- Making and answering calls
- Personalizing Your Phone
- Installation and commissioning
- Further information
- Index
Supplementary features
Aastra 610d 35
eud-1093/1.1 – I7.9 – 09.2009
■ Forwarding calls (Forwarding on No Reply)
You want calls that you receive on your phone to be forwarded to another destination.
Both your own phone and the other destination will then start ringing. The system configura-
tion determines whether or not there is a ringing delay at the other destination. Whoever goes
off-hook first, answers the call. Depending on the system configuration, Forwarding on No
Reply can also be activated when your phone is busy.
User
Scroll to User and confirm with the Ok softkey.
Enter the user’s call number and confirm with the Ok softkey.
➔ Forwarding is activated.
Note:
You can also find the call number of the user you are looking for in the redial
list.
Deactivating forwarding:
Press Menu > Activated features > Reset.
Notes:
• If a call is to be forwarded only when you are already in a call, select Forward-
ing if busy.
• You can also forward to your Voice Mail (see Chapter "Forwarding to Voice
Mail", page 36) or to a Message (see Chapter "Forwarding to message", page
36).
• You can also activate forwarding by remote control, see Chapter "Setting
functions by remote control", page 43.
Activating forwarding:
Press the navigation key to the right or the Menu softkey.
Forwarding
Scroll to Forwarding and press the Select softkey.
Forwarding on No Reply
Scroll to Forwarding on No Reply and confirm with the OK softkey.
User
Scroll to User and confirm with the Ok softkey.
Enter the call number of the destination to which you want your calls to be for-
warded and confirm with the Ok softkey.
➔ Forwarding is activated.
Note:
You can also find the call number of the user you are looking for in the redial
list.
Deactivating forwarding:
Press Menu > Activated features > Reset.
Notes:
• You can also forward to your Voice Mail (see Chapter "Forwarding to Voice
Mail", page 36).
• You can also activate forwarding by remote control, see Chapter "Setting
functions by remote control", page 43.