Product manual

Maintenance and Repair
6-1
Part 1105120-01
E 2013 Nordson Corporation
Section 6
Maintenance and Repair
WARNING: Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
Introduction
Establish acceptable curing levels for your process and then develop a
maintenance schedule that fits your needs. Radiometers can be used to
measure relative readings for spectral output as a means of monitoring
spectral intensity.
The maintenance and replacement schedule for the system will depend
upon your:
S application process.
S plant environment.
S quality of cooling air passing through the system.
S coating formulation.
Torque Specifications for System Fasteners
Torque specifications for controller and lamphead fasteners are contained in
tables following the controller and lamphead parts lists in the Parts section.
They are identified in the tables and illustrations by item number. Use these
tables to prevent over- or under-tightening the fasteners.
System Controller Maintenance and Repair
Maintenance Schedule
Recommended maintenance for the system controller consists of removing
dust from the enclosure and components. This should be done as
necessary.