Product manual

Operation
4-7
Part 1105120-01
E 2013 Nordson Corporation
Changing system status from LAMP ON to STANDBY
Total Seconds
20 seconds
Display reads LAMPON.
Press STANDBY button Twice.
Display reads IDLE followed by L COOL.
Display reads STDBY.
NOTE: If Idle is not enabled, pressing the Standby button Once switches the
controller to Standby mode.
Changing system status from STANDBY to LAMP ON
Total Seconds
10 seconds
Display reads STDBY.
Press SYSTEM ON button.
Display reads LMPDLY.
Display reads LAMPON.
Changing system status from LAMP ON to OFF
Total Seconds
60 seconds
Display reads LAMPON.
Press SYSTEM OFF button.
Display reads C DELY.
Display reads OFF.
Shutdown timing at completion of process allows for proper cooling.