Specifications

Phone: [phone]
Fax: [phone]
88
URH-14
Remote Control Handle
Features
•ForUsewithAllElectricalandBattery
Operated Single Acting Pumps
•AllowsOperatorOneHandControlattheTool
Head
•10FootCord
Specifications
Weight 3 lbs.
Size 8”L x 1.5”W x 6.5”H
FS-14
Foot Switch
The URH-14 remote control handle is for use with the R-14EF, R-14EA and
REC-P1 pumps. It is equipped with a standard 3/8” high pressure coupler that
can be easily matched to your existing tool head. A 10 foot, three wire control
cable can be hooked directly to the R-14EF or hard wired to any pump that has
similar remote control features. The URH-14 weighs only three pounds and is
made of tough, durable, molded plastic with a double insulated on/off switch.
The
FS-14 was designed to replace our pendant hand control on pump models R-14EF,
R-14EA, R-14EAD and REC-P1. This foot control allows the operator to free his hands for
better control of his work load. It has a green pedal for the advance mode and a red pedal
for the retract mode. The FS-14 is mostly used in work bench applications.
HydRauliC pumps & punCHes
Features
•ForUsewithAllElectricalandBatteryOperated
Single Acting Pumps
•AllowsOperator“HandsFree”Controlof
Advance and Retract Pump Mode
•10FootCord
Specifications
Weight 4.2 lbs.
Size 9.5”L x 7”W x 3”H
Order Data
URH-14 Remote Control Handle
REC-URH Remote Control Handle
forREC-P1
Optional Accessories
URH-14 Remote Control Handle
FS-14
FootSwitch