Specifications

Phone: [phone]
Fax: [phone]
80
AS-025&AS-118
Cable Stripper for Semi-con and Secondary
Features
•Semi-conStripper
•.025BladeDepthAvailable
•Upto1”MaximumO.D.
Order Data
AS-118 AdjustableStripper
AS-025 Fixed.025Depth
Stripper
ASB Replacement Blade
NP-400
Insulation Stripper
The Huskie AS-118 cable stripper is used for cables from .180 to 1 inch
max. O.D. It has an adjustable blade depth to a maximum of .118” for use on
most plastic jacketed cables. Tough insulation can be cut in a spiral direction
for easier stripping, while other insulation can simply be cut longitudinally for
quicker stripping. The model
AS-025 is the same, except for a fixed blade
depth of .025” used for many semi-con jackets.
Features
•CapableofMidspanStripping
•Upto1-1/4”O.D.
•CopperandAluminum
•SpringLoad
Accessory
400-10 Replacement Blade
The Huskie NP-400 can strip insulation from a conductor with an O.D. of .35” to
1-1/4” and a maximum insulation thickness of 3mm (.118). This tool will not work on semi-
conductor since the cutting blade uses a scoop design to pull insulation away from the
wire strands. It is most commonly used on jacketed aluminum and copper cables for both
underground and overhead. Our peeler can handle mid-span stripping as well as cable
end preparation. A simple rotation and hand force is all it takes to remove the jacket.
Either handle can be removed for close quarter operation.
It is necessary to change the blade depth according to the insulation thickness. Send cable
samples to Huskie Tools for testing.
NOTE: NOT FOR REMOVING SEMICONDUCTOR JACKETS.
HydRauliC & manual Cutting tools