Specifications

Phone: [phone]
Fax: [phone]
74
HydRauliC CompRession toolsHydRauliC & manual Cutting tools
Huskie’s S-Series tools cut anything from guy wire* to anchor rod and most overhead and underground cables. The S-series
cutters are portable, lightweight, and made to last years under the toughest field conditions. The S-40B and S-85 feature a
two stage pumping piston for rapid advance.
The new S-240CC, S-32CC and SP-24CC hydraulic cutters were specially engineered to cut the toughest EHS guy wire,
ground and anchor rods. The SP-24CC is the remote head version, which requires an external 10,000 psi pump in order to
operate. The anvil style, center cut blades eliminate jamming problems common to shear style cutters, and the blades are
easily replaced in the field. The tools are made of high grade steel and have rubber handle grips. All tools are black zinc oxide
coated to help reduce corrosion. A flip-top latch opens the tool jaw to easily accept cables and wires. The head can be rotated
up to 180° to facilitate easy wire positioning and operator leverage.
Consult the chart below to pick the proper cutter for your needs. If there are any questions about capacities, or special
applications please contact Huskie Tools.
*NOTE: DO NOT CUT EHS GUY WIRE. FOR EHS GUY WIRE SPECIFY S-240CC, S-32CC OR THE REMOTE HEADS SP-24CC
OR SP-32CC1.
S-SERIES
Handheld Hydraulic Cutters
Specifications
Model
S-16 S-20 S-240 S-32 S-40B S-55 S-85
S-240CC S-32CC
Output
4.4 Ton 4.4 Ton 7.8 Ton 19.8 Ton 6.3 Ton 13 Ton 2.7 Ton 7.8 Ton 19.8 Ton
Weight
6 lbs. 6 lbs. 9 lbs. 21 lbs. 12 lbs. 17 lbs. 15 lbs. 11 lbs. 23 lbs.
Length
15”L 15”L 17”L 27”L 23”L 24”L 26”L 18.5”L 27”L
Jaw
Opening
.6” .75” .9” 1.25” 1.6” 2” 3.3” .9” 1.25”
Capacities
Wire Ropes
16mm 20mm 22mm 32mm 20mm 26mm Do Not Cut Do Not Cut Do Not Cut
5/8” 3/4” 7/8” 1-1/4” 3/4” 1”
Soft Steel
Bolts
16mm 17mm 22mm 32mm 20mm 32mm Do Not Cut 16mm 26mm
5/8” 11/16” 7/8” 1-1/4” 3/4” 1-1/4” 5/8” 1”
Rebar,
Ground &
Anchor Rod
13mm 13mm 16mm 22mm 16mm 20mm Do Not Cut 16mm 26mm
1/2” 1/2” 5/8” 7/8” 5/8” 3/4” 5/8” 1”
Cu & Al
Wire
16mm 20mm 22mm 32mm 40mm 50mm 76mm Do Not Cut Do Not Cut
5/8” 3/4” 7/8” 1-1/4” 1-1/2” 2” 3”
ACSR
16mm 20mm 22mm 32mm 40mm 50mm Do Not Cut Do Not Cut
Do Not Cut
5/8” 3/4” 7/8” 1-1/4” 1-1/2” 2”
Standard
Guy Wire
13mm 14mm 16mm 22mm 16mm 20mm Do Not Cut 14mm 22mm
1/2” 1/2” 5/8” 7/8” 5/8” 3/4”
9/16”EHS 7/8”EHS
Telephone &
Lead
Sheathed
Cable
Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut 85mm Do Not Cut Do Not Cut
3.35”
Chain
Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut Do Not Cut 1/4” 1/2”