Specifications

www.huskietools.com 63
Specifications EP-100WC
Output 100 Ton
Weight 96 lbs.
Size 7-1/2”W x 14”H
Die Style HA100-Series
Ram Stroke .98” Travel
OilVolume 314 cc
Specifications EP-200WA
Output 200 Ton
Weight 190 lbs.
Size 14”W x 17”H
Die Style HA200-Series
Ram Stroke 1.57” Travel
OilVolume 1134 cc
EP-100WCAccepts“HA100-
SERIES”TypeDies
• See Page 67 for
Available Huskie Dies
EP-100WCandEP-200WA
100 and 200 Ton Compression Head
The EP-100WC and EP-200WA are 100 and 200 ton compression heads
for full tension, transmission and substation connections and require an external
10,000 psi pumping source.
The EP-100WB will accept shell type dies currently used with Alcoa 100 ton
compression heads. Dies for 200 ton presses are considered special application
and must be engineered to the connector manufacturers specifications. Consult
factory for these dies. Both compression heads are double acting and designed
to operate from Huskie Tools pump models R14EAD, HPG-4 or any 3/4 HP high-
pressure, double acting pump with the proper oil capacity.
Double acting means hydraulically advancing the ram to build proper tonnage,
then the hydraulic pressure is reversed to retract the ram. This will eliminate all
possibilities of the connector hanging up or the tool jamming. The EP-200WA is
the only 200 ton press on the market today and both are the lightest weight models
in their class. Both models have removable die caps for easy connector positioning
and 3/8” screw-type couplers.
NOTE: When using any of these high-pressure tools, always use 10,000 psi rated
non-conductive hose (NC-16 series).
Features
•DesignedforFullTensionTransmissionand
Substation Connections
•DoubleActingHydraulicCylinderfor
Quicker Return Times
•LightestWeightModelsinTheirClass
•RemovableDieCapsforEasyCableInsertion
HydRauliC CompRession tools