Specifications

Phone: [phone]
Fax: [phone]
62
Specifications
Output 60 Ton
Weight 47 lbs. (Steel)
34 lbs. (Titanium)
Size 6”W x 17”H
Cable Capacity 2.4” O.D.
Die style HA60-Series
Ram Stroke 1.5” Travel
OilVolume 303 cc
Connector Range
Lugs Up to 2000 MCM Cu/Al
Splices Up to 2500 MCM Cu/Al
Order Data
EP-60D 60 Ton Double Acting
Compression Head
EP-60DT Titanium Model
Accepts“HA60-SERIES”
Type Dies
• See Page 67 for
Available Huskie Dies
EP-60D(Steel), EP-60DT(Titanium)
60 Ton Double Acting Compression Head
The EP-60D series is a double acting model. Double acting tools will eliminate the
possibility of the tool jamming. Double acting means hydraulically advancing the ram
to build the proper tonnage, then the hydraulic pressure is reversed to retract the
ram. This will ensure the ram to retract without having to pry the jaws apart to release
them and it will also retract much faster than single acting spring release tools.
Titanium has the strength of steel but weighs nearly 30% less. Due to its lighter
weight and the tool’s portable design, the chance of back and muscle strain is greatly
reduced. The titanium 60 ton press is easily maneuvered where heavy steel presses
are almost impossible to operate making it an ideal tool for jobs such as helicopter
line installations.
NOTE: When using any of these high-pressure tools, always use 10,000 psi rated
non-conductive hose (NC-16 series).
Features
•DesignedforACSR&ACARTransmission
and Distribution Cable
•DoubleActingHydraulicCylinderfor
Quicker Return Times
•UltraLightTitaniumModelAvailable
•ExtremelyPortable
EP-60DT
HydRauliC CompRession tools