Specifications

Phone: [phone]
Fax: [phone]
60
EP-510HK
12 Ton Remote Compression C-Head with Rubber Boot – 1.5” Jaw Opening
Specifications
Output 12 Ton
Weight 13.5 lbs.
Length 14”
JawOpening 1.5”
Connector Range
Lugs Up to 1033 MCM Stranded
Splices 477 ACSR
EP-610H
15 Ton Remote Compression C-Head – 2” Jaw Opening
The EP-510HK is a Kearney style tool which accepts PH-2, WH-2, and
WH-3 style dies.
It has 12 tons of output and is used for crimping up to 750 MCM lugs or splices. An
external 10,000 psi pumping source is needed to develop 12 tons of compression
force. The EP-510HK comes complete with a 3/8” male, screw type coupler and
carrying case.
NOTE: When using any of these high-pressure tools, always use 10,000 psi rated
non-conductive hose (NC-16 series).
Feature
•AlsoAvailableforT&BStyle15TonDies
 (ModelEP-610TB)
Specifications
Output 15 Ton
Weight 14.5 lbs.
Length 14.5”
JawOpening 2” (1.5” with “U” Die
Adapter)
Connector Range
Aluminum #8 AWG-1250 MCM
Copper $8 AWG-1500 MCM
The EP-610H is a remote C-head that requires an external 10,000 psi pumping
source. It accepts all Huskie HT61 series and Burndy “P” type dies used in the Y-46.
When used with a Huskie PU-15 die adapter it will accept all “U” type dies used with
any 12 ton tool. This tool is primarily used for cables above 750 MCM or in cases where
additional tonnage is required to compress larger lugs, terminals and sleeves on tension
connections. It is most always used on larger underground cables up to 1000 MCM. The
EP-610H is supplied with a 3/8” male, screw type coupler and carrying case.
NOTE: When using any of these high-pressure tools, always use 10,000 psi rated
non-conductive hose (NC-16 series).
Optional Accessories
PU-15 “U” Die Adapter, p. 93
HydRauliC CompRession tools
Accepts “WH-2”and
“WH-3” Type Dies
• See Page 66 for
Available Huskie Dies
Optional Accessory
UDK-1 “U” Die Adapter, p. 93
Accepts “P” Type Dies
• See Page 66 for
Available Huskie Dies
Feature
•ProtectiveRubberBooton“C”Head
UDK-1
PU-15