Specifications

Phone: [phone]
Fax: [phone]
58
EP-410H
12 Ton Remote Compression C-Head with Rubber Boot – 1” Jaw Opening
Specifications
Output 12 Ton
Weight 8-1/4 lbs.
Length 10”
JawOpening 1”
Connector Range
Lugs #8-750 MCM Cu
Splices #10-400 MCM Cu
EP-410HT
12 Ton Remote Titanium Compression C-Head – 1” Jaw Opening
The EP-410H is a traditional C-head with a one-inch jaw opening. It will accept all
“U” type dies currently used in 12 ton tools on today’s market.
A 10,000 psi external pump is required to operate the C-head. The output pressure
is 12 tons when the pump is set at 10,000 psi. After a compression is made on a lug
or sleeve, an internal ram spring retracts the jaw when the pump pressure is relieved.
The tool is supplied with a standard 3/8” male, screw type coupler but can be fitted
with an opposite female coupler if requested. Carrying case included.
NOTE: When using any of these high-pressure tools, always use 10,000 psi rated
non-conductive hose (NC-16 series).
Features
•ExtremelyLightweightTitanium
•IdealforHotStickApplications
•AlltheSameFeaturesastheEP-410HModel
Specifications
Output 12 Ton
Weight 5 lbs.
Length 10”
JawOpening 1”
Connector Range
Lugs #8-750 MCM Cu
Splices #10-400 MCM Cu
The unique, lightweight titanium head of the EP-410HT reduces its weight to
just five pounds. This is an ideal weight for Hot Stick handling since it is easy to lift
and effortless to control while making connections. Though more expensive than
conventional 12 ton tools, operator preference and performance when handling this
tool will save time and investment over the life of the product. The tool is supplied with
a standard 3/8” male, screw type coupler but can be fitted with an opposite female
coupler if requested. A carrying case is included.
NOTE: When using any of these high-pressure tools, always use 10,000 psi rated
non-conductive hose (NC-16 series).
Optional Accessories
HTADPT Hot Stick Adapter
HydRauliC CompRession tools
Accepts “U” Type Dies
• See Page 65 for
Available Huskie Dies
Accepts “U” Type Dies
• See Page 65 for
Available Huskie Dies
Feature
•ProtectiveRubberBooton“C”Head