Specifications

Phone: [phone]
Fax: [phone]
56
EP-510K
12 Ton Compression Tool with Rubber Boot – 1.5” Jaw Opening
Specifications
Output 12 Ton
Weight 17 lbs.
Length 26”
JawOpening 1.5”
Connector Range
Lugs Up to 1033 MCM Strand
Splices 477 ACSR
CN-58H
6 Ton Remote Compression C-Head with Rubber Boot – .95” Jaw Opening
The Huskie EP-510K was designed to accept Kearney dies commonly used in their
models WH-2, PH-2, and WH-3 hydraulic tools. It features our exclusive replaceable
bypass cartridge to facilitate shop repairs and eliminate costly down time. A carrying
case is included.
NOTE: Tool output tonnage can be determined by using our model PG-4 pressure
gauge with model TDK-1.
Features
•3/8”MaleScrewTypeCouplerProvided
•ProtectiveRubberBooton“C”Head
Specifications
Output 6 Ton
Weight 6 lbs.
Length 12”
JawOpening .95”
Connector Range
Lugs #6-500 MCM Cu
Splices #6-4/0 Al
H-Taps 4/0-4/0 Al
The CN-58H remote operated “C” head requires an external pumping source of
10,000 psi. It accepts Kearney “O” type and Burndy “W” type dies. It is a service
entrance compression tool and the smallest of our compression tool line. The head
is lightweight for easy handling in hot stick applications.
The tool is supplied with a 3/8” male screw type coupler and a carrying case.
NOTE: When using any of these high-pressure tools, always use 10,000 psi rated
non-conductive hose (NC-16 series).
Order Data
EP-510K Compression Tool
PG-4K
TestGaugewithTDKDies
HydRauliC CompRession tools
Optional Accessory
UDK-1 “U” Die Adapter, p. 92
Accepts “WH-2”and
“WH-3” Type Dies
• See Page 66 for
Available Huskie Dies
Accepts “W”, “O” and “X”
Type Dies
• See Page 64 for
Available Huskie Dies
Features
•ProtectiveRubberBooton“C”Head
•ExternalPressureAdjustment
UDK-1