Specifications

www.huskietools.com 47
The Huskie REC-P1 is a 28.8 volt, battery operated hydraulic pump that runs on
two 14.4 Volt BP-80 batteries. The REC-P1 is supplied with a push button remote
control that allows the operator to advance, hold, and retract when needed. The
user is never committed to a full cycle and can always back off at any time during the
advance – even when the pump is under pressure. High pressure, non-conductive
hose can be attached to a 360° moveable swivel port on the pump. This swivel port
allows the user to position the hose to fit in confined aerial buckets and manholes.
Both batteries must be inserted in the pump to operate. It is recommended to
operate the pump with a 10 foot hose, up to a maximum of 20 feet. A longer hose
will cause cycle times to increase.
We recommend you specify the Huskie SC-Series flush face dripless couplers, as not
to deplete the oil in the reservoir when changing heads.
For additional ordering information, please refer to page 10.
REC-P1ROBO*PUMP
10,000 psi Battery Powered 28.8 Volt Pump
Robo batteRy opeRated tools - ReC line
Features
•Powerful28.8Volt
•OperateUptoSingleActing60TonPress
•Adjustable10,000psi
•EliminatestheNeedforACPower
•CompactandPortable
•5YearWarrantyonTool,Battery&Charger
Specifications
Output 10,000 psi
Weight 23 lbs. with 2 Batteries
Size 16”L x 6”H x 10”D
Crimping Estimates
2 BP-80s
Using a 10 ft. Hose
andEP-60Won
1272 ACSR
12
No Load Cycle
Time
Advance 25 Sec., Retract
30 Sec.
Optional Accessories
FS-14 FootSwitch,p.88
URH-14 Remote Handle, p. 88
REC-P1CASE Steel Carrying Case, p. 94