Specifications

www.huskietools.com 45
The REC-S540 is designed to cut up to 1590 ACSR and regular guy wires and
ground rod up to 5/8”. The REC-S540 is ideal for aerial bucket work and trench
operations. It features a two stage, rapid advance ram for reduced cycle times.
This cutter is made for one-handed operation. Simply remove the pin latch, place
over cable, reinsert pin, and cut. A built-in bypass will pop off if the material is beyond
the cutter’s capacity. It is not recommended to cut hardened steel.
NOTE: DO NOT CUT EHS GUY WIRE OR CASE HARDENED STEEL RODS. SEE
REC-S524CC, S-24CC, SP-24CC, S-32CC OR SP-32CC1.
For additional ordering information, please refer to page 10.
REC-S540ROBO*CUT
TM
8 Ton Cutting Tool with .6” Jaw Opening
Features
•TestedUpto75kV
•OneHandOperation
•RotationalHead
•RapidAdvance
•ErgonomicallyBalanced
•ErgonomicPistolGripHandle
•WeatherResistantHousing
•OverloadBypassProtection
•5YearWarrantyonTool,Battery&Charger
Specifications
Output 8 Ton
Weight 14.6 lbs. with Battery
Size 17.5”L x 12.5”H x 2.5”W
JawOpening 1.6”
Cutting Estimates
BP-80
795 ACSR 60
3/4” Wire Rope 90
5/8” Rebar 60
5/8” Ground Rod 60
3/8” Guy Wire 40
Cutting Capacities
Wire Rope 3/4”
Rebar (Sc 40) 5/8”
Rebar (Sc 60) 5/8”
Ground Rod 5/8”
ACSR 1590 MCM
Guy Wire 5/8”
Cu/Al Cable 1.5”
Due to material composition, the ratings are to be used
as a guide. Actual capacity may vary due to “bypass”
feature.
Robo batteRy opeRated tools - ReC line
40-14
REC-S540 Replacement Blade