Specifications

Phone: [phone]
Fax: [phone]
44
REC-S524CCROBO*CUT
TM
8 Ton Cutting Tool with .95” Jaw Opening
The REC-S524CC was designed to cut the toughest steel used in construction
today. It can replace an entire tool kit, including several sizes of conventional
bolt cutters, hacksaw, acetylene torches and cable cutters. The REC-S524CC was
designed from the same hydraulic system as the REC-558U featuring a rapid advance
ram for reduced cycle times.
The specially designed anvil style blades were made to cut EHS up to 9/16” and with
the pull of the trigger, you can cut ACSR cables up to 477 MCM, standard guy wires
to 5/8”, and ground rods to 5/8”. The specially designed flip-top latch and rotating
head provide exceptional ease of use and maneuverability in tight working quarters.
The REC-S524CC has an overload bypass, which will “kick out” when tool reaches 8
tons or is attempting to cut cables beyond its capacities.
For additional ordering information, please refer to page 10.
Features
•Flip-TopLatchingHead
•TestedUpto75kV
•OneHandOperation
•RotationalHead
•RapidAdvance
•ErgonomicallyBalanced
•ErgonomicPistolGripHandle
•WeatherResistantHousing
•OverloadBypassProtection
•5YearWarrantyonTool,Battery&Charger
Specifications
Output 8 Ton
Weight 10 lbs. with Battery
Size 12.5”L x 12”H x 2.5”W
JawOpening .95”
Cutting Estimates
BP-80
477 ACSR 90
1/2” Rebar 60
1/2” Ground Rod 60
3/8” Guy Wire 40
Cutting Capacities
ACSR 477 MCM
Standard Guy Wire 5/8”
EHSGuyWire 9/16”
Ground Rod 5/8”
Rebar (Sc 40) 5/8”
Due to material composition, the ratings are to be used as
a guide. Actual capacity may vary due to “bypass” feature.
Robo batteRy opeRated tools - ReC line
24C-08
REC-S524CC Replacement Blade