Specifications

www.huskietools.com 39
The REC-54ACM was designed to cut stranded copper cables and aluminum.
The jaws will accept a maximum of 1500 MCM aluminum. The operation of this tool
is the same as the REC-54M, but it has sharper blades for cutting only non-ferrous
materials. Do not cut steel with this model, or blade damage will occur.
The REC-54ACM comfortably fits into the lineman’s gloved hand, and repetitive
ratcheting movement is entirely eliminated. We have rotated the handle 90° to the
blade to achieve a more ergonomic and comfortable cutting position. Just a squeeze
of the trigger is all it takes to make a cut and almost no muscle power is needed. As
a result, the risk of sprains, strains, and lost time due to muscle related injuries can
be significantly reduced.
The moveable blade has wide gear teeth for extra power and full cutting traction.
Gear guides are attached on both ends of the movable blade to align the gear teeth
with the internal pinion gear.
For additional ordering information, please refer to page 10.
REC-54ACMROBO*SLICE
TM
Gear-Driven Cable Cutter with 2-1/8” Jaw Opening
Robo batteRy opeRated tools - ReC line
Features
•ImprovedErgonomicHandle
•2-1/8”JawOpening
•Cutsupto1500MCMAl
•OneHandOperation
•SafetyLockoutSwitch
•UpgradedMotorandGearSystem
•5YearWarrantyonTool,Battery&Charger
Specifications
Weight 7.2 lbs. with Battery
Size 16”L x 4”H x 4.5”W
JawOpening 2-1/8”
Cutting Estimates
BP-80
1000 MCM Cu 25
1500 MCM Al 30
Cutting Capacities
Aluminum 1500 MCM
Copper 1000 MCM*
*Due to material composition, the ratings are to be used
as a guide. Actual capacity may vary due to overload circuit
breaker protection feature.
DO NOT CUT STEEL OR ACSR. Consult factory for more
information on cutting copper cable.